NRS Longhorn Frame

Longhorn Components: (2) Side Rails (1) Seat Bar (1) Foot Bar (1) Pair of Oar Mounts (6) U-bolts (12) Washers and Locking Nuts (1) Frame Wrench (1) Standard padded seat with bolts and washers Note: Seat is packaged separately

Directions

1. Lay out the frame parts as shown in the image above.
    
2. Set the seat and foot bars on the side rails and install the U-Bolts. Add the washers and nuts leaving them loose. Be sure that the side marked "Front" on the seat bar faces forward. If any of the bars need to be repositioned, it may be necessary to remove the U-bolts to make adjustments.
    
3. Add seat and oar mounts.
    
4. Check to be sure that all of the U-bolts are tight. Periodically check the tightness of all nuts and bolts.
    

* Adobe Acrobat 3.0 is required to view printable directions

Download Acrobat Reader