NRS Skidguard Frame
Directions
- Lay out the frame parts as shown in the image above.
- Place the skidguard seats textured side up. Add the channels with
the flat side against the seat.
- Place the side rails in the channels with the small holes in the
side rails facing up.
Note: There are two differnet size holes in the rails. This aids in
lining up the bolts to the threaded insert in the seat.
- Add the oar mounts and tighten all of the bolts.
- When you are storing your frame for long periods of time, it is reccommended
that you give the raw wood edges a light coat of waterproofing (i.e.
Thompson's Waterseal) to keep the wood from weather checking.
|
