NRS Stern Seat Mount Frame
|
Stern
Seat Mount Components:
- (2) Bent Side Rails
- (1) Seat Bar
- (4) U-bolts
- (8) Washers and Locking Nuts
- (1) Action
Swivel Seat with nuts, bolts and washers
Note: Seat is packaged seperately
Note: Cross bar is not included
|
 |
Directions
- Lay out the frame parts as shown in the image above.
- Set the side rails on the seat and cross bars and install the U-bolts.
Add the washers and nuts, leaving them loose. If either of the bars
need to be re-positioned, it may be necessary to remove the U-bolts
to make adjustments.
- Make sure the side marked "Front" on the seat plate faces
forward. Add seat.
- Check to be sure that all of the U-bolts are tight. Periodically
check the tightness of all nuts and bolts.
|
