Frame Instructions: Universal Frame

NRS Universal Frame Components: (2) Breakdown Side Rails (2) Universal Drop Rails (5) Cross Bars (1) Seat Bar (1) Deluxe Foot Bar (1) Pair of Oar Mounts (4) 9ft Straps (8) Strap Slides (20) U-bolts (40) Washers and Locking Nuts (1) Frame Wrench High-Back Drain Hole Seat with bolts and washers Note: Seat is packaged separately

Directions

1. Lay out the frame parts as shown in the frame sketch.


2. Set the seat, foot, and cross bars in place and add the U-bolts. Be sure that the side marked "Front" on the seat plate faces forward. Adjust the cross bars so that they fit against the cooler or dry box snugly. (It may be necessary to remove the U-bolts to make adjustments.)


3. Turn the frame upside down and add the drop rails.


4. Add seat and oar mounts.
   
   Note: See Strap Slide Instructions


5. Check to be sure that all of the U-bolts are tight. Periodically check the tightness of all nuts and bolts.

*Printable Universal Frame Directions

* Adobe Acrobat 3.0 is required to view printable directions

Download Acrobat Reader