NRS Frame Stern Seat Mount with Seat
$224.95
The NRS Stern Seat Mount attaches to the rear crossbar to put your angler up where the action is. The Swivel Fishing Seat rotates 360 degrees for unlimited casting angles. You can also attach the Anchor Mount to the seat bar.
- The seat mount sits atop the raft stern tube to elevate the angler for good visibility and casting safety.
- The included Angler Swivel Fishing Seat provides all-day seating comfort.
- The seat swivels easily and also locks in position.
- The side rails curve to follow the raft tubes, keeping the stern compartment open and clear.
- NRS LoPro Fittings provide complete adjustability.
- Add the Angler Seat Caddy for a handy storage tray for beverages and tackle.
- The NRS Raft Stern Frame Anchor System attaches right to the tubing of the seat bar.
- Angler Swivel Seat is not recommended for whitewater.
- The Stern Seat Mount works best, especially if you are adding a Raft Anchor Mount, when the seat bar is in, or near, the center of the raft's stern tube. Measure the distance from the center of the frame crossbar you are attaching the stern rails to, out to the center of the stern tube panel. If that distance is different from the stock stern rail lengths (32" on the Small and 36" on the Large), give us a call with the measurement, the width of your frame and your boat model, and we will help you to get the right stern rails.
More Information
- Frame Type: Fishing Frames
- Dimensions: Available Sizes
- Weight: 20 lbs.
- Material: Modular Anodized Aluminum Frame
-
Components:
- 2 - Side Rails
- 1 - Angler Seat Bar
- 1 - Angler Swivel Fishing Seat
| Stern Seat Mount Frame Sizes | |||||||||||||||
|
REVIEW SNAPSHOT®
by PowerReviewsNRS Frame Stern Seat Mount with Seat
(based on 2 reviews)
Ratings Distribution
Reviewed by 2 customers
Sort by
Displaying reviews 1-2
Pros
- Bolted up perfectly
- Built to last
Cons
- None
Best Uses
- Perfect for fishing
Comments about NRS Frame Stern Seat Mount with Seat:
The frame is well built and fit perfectly. Makes fishing in the back of the boat alot easier with the 360 deg seat swivel.
- Was this a gift?:
- No
Pros
Cons
Best Uses
- Day Trips
- Rapids Paddling
- Rivers
Comments about NRS Frame Stern Seat Mount with Seat:
This is exactly what we needed for our NRS raft. [...]. We have used it several times this summer.
- Was this a gift?:
- No
Displaying reviews 1-2
Do you have questions about this product?
get answers from real customers and in-house experts with AnswerBox.
5 Questions | 12 Answers
Displaying questions 1-5
- NRS Frame Stern Seat Mount with Seat
Q:
what is the installed center to center measurement for the width where the side rails meet the rowing frame attachment for both small and large? Are the motor mount rails bent and sized the same as the stern seat frame? Thanks!Asked on 5/14/2013 by leonard neemoil from salida, co2 answers
VERIFIED BUYER
A:
Yes, the motor mount rails are sized same as the stern seat frame.
I have the outlaw boat and used the side rails with an additional front bar (ordered seperately) to accomodate the stern seat and motor mount attaching to the d'rings and frame. With the use of the clamps, the system easily modified. Steve
A:
Leonard, the Small Stern Seat Mount Bars are bent to fit on cross bars 54"W or less; the Large for cross bars 60"W or more, so there is no fixed c-to-c. The Motor Mount Bars are the same as the bars on the Large Stern Seat Mount.Answered on 5/15/2013 by Clyde from NRS
- NRS Frame Stern Seat Mount with Seat
Q:
i have a 54" frame...want to b able to put anchor system on mount as well.. should i get 60" ?Asked on 12/18/2012 by sam from tn2 answers
A:
The Small Stern Seat Mount is made for frames 54" and narrower. The Stern Side Rails that come with the stock frame are 32" in length; the length from the crossbar to the seat bar. Measure the distance from the main frame crossbar to which the rails will attach, to the center of the rear raft tube panel. If that distance is longer than 32", give us a call, 800.635.5202, and we'll make custom length rails for you.Answered on 12/18/2012 by Clyde from NRSVERIFIED BUYER
A:
Not trying to be smart but you answered your own question. If you have a 54" frame then you must get a 54" stern seat frame, the 60" would not line up. Also the anchor mount can mount on both systems so if you upgrade to a wider raft then the anchor mount would be transferable.
Get Wet next year!
Patrick
- NRS Frame Stern Seat Mount with Seat
Q:
How much does this weigh?Asked on 12/6/2012 by Doug from Richmond, VA3 answers
VERIFIED BUYER
A:
About 30 lbs (est.)
MikeAnswered on 12/6/2012 by AnonymousA:
It weighs approximately 20 pounds.Answered on 12/6/2012 by Clyde from NRS
- NRS Frame Stern Seat Mount with Seat
Q:
1) For the small, what is the length of the curved side bars?
2) Will the small fit one of your 48" wide frames?
3) If the rower's seat is on the rear crossbar of the frame, can that same rear crossbar be used to mount the stern seat mount (or should a separate rear crossbar be added to handle the weight of the stern passanger)?
Thanks!Asked on 9/14/2012 by new rafter1 answer
A:
1) For the Small the length is 32" - distance from the seat bar to the frame crossbar it attaches to. The Large is 36". 2) Yes, the Small will fit on the 48" frame. 3) Yes, the stern rails can attach to a rower's seat bar.Answered on 9/14/2012 by Clyde from NRS
- NRS Frame Stern Seat Mount with Seat
Q:
If I have a 60" compact outfitters frame should I get the large stern seat mount?Asked on 9/4/2012 by yard sale4 answers
A:
For 60" and larger frames, you want the Large Stern Seat Mount.Answered on 9/4/2012 by Clyde from NRS
Displaying questions 1-5
Related Items
Alternate Items
Related Search
