NRS Pennel Orca Fixed Batten System

$22.95

This Item was added to Your Cart

QTY

Check Availability

Item# 1455 / 37351.01

Product Rating

Write a Review

Q&A

Ask questions, get answers

Ask a Question

Share |

Product Info
Specs
Reviews
Q&A

Allows quick and easy installation and removal of raft thwarts. Requires two per thwart.

More Information

Clifton Hypalon Instructions

Boat-side patch 9 3/4" x 6"
Thwart-side patch 6 1/2" x 6"
Includes batten
Use Clifton adhesive for application

REVIEW SNAPSHOT®

by PowerReviews

NRS Pennel Orca Fixed Batten System

4.7

(based on 3 reviews)

100%

of respondents would recommend this to a friend.

Pros

Cons

Best Uses

- Was this a gift?:
- No (3)

Reviewed by 3 customers

Sort by

Displaying reviews 1-3

9/24/2012

4.0

Easily convert your old Lace-in thwarts

By Mattski

from Flagstaff, AZ

About Me Casual/ Recreational

Pros

Works Well

Cons

Best Uses

Convert Older Model

Comments about NRS Pennel Orca Fixed Batten System:

I have an older Achilles self bailing with lace-in thwarts which worked well but were very cumbersome and time-consuming to install. Taking the time to install these will greatly enhance your boating experience without compromising the integrity or strength of the boat or thwarts.

7/17/2012

5.0

Nice Retro-fit,

By Epic Andy

from Asheville, NC

Pros

Cons

Best Uses

Comments about NRS Pennel Orca Fixed Batten System:

Able to take fixed thwarts out for oar frame, then replace thwarts for paddle raft. Added plus is using the plastic batten in its sleeve without thwarts for tie down of frame inside the raft. ( acts like a D-ring without being in the way as a paddle raft.) Easy to use.

5/29/2011

5.0

Works great!!!

By Matty

from Sandy,Ut

Pros

Easy to Install

Cons

Best Uses

Comments about NRS Pennel Orca Fixed Batten System:

I used theses to replace the thwarts I cut out to use my row frame. Installing them was a breeze.

Displaying reviews 1-3

Do you have questions about this product?

get answers from real customers and in-house experts with AnswerBox.

1 Question | 5 Answers

Displaying question 1

NRS Pennel Orca Fixed Batten System
Q:
I have a hyside 10' raft and I cut the threads connecting the thwarts to remove them. I want to install the Pennel orca fixed batten system but there are still threads present on the thwarts and raft where I will put the new battens. Do I need to remove all these threads to get good contact or can I just glue over them? Some threads are longer than others.
Asked on 5/7/2013 by Bruno
Know the answer? Answer this question
5 answers
- VERIFIED BUYER
  
  A:
  You need to sand the thwart and the tube of the boat to get proper adhesion... just sand off the threads at this time and you will be good to go.. I use a sanding disc in a drill motor...
  Answered on 5/8/2013 by Steve from Seattle
- VERIFIED BUYER
  
  A:
  I would recommend removing all the threads, as labor-intensive as this may be, to get a good adhesion between the batten and tube.
  Mine worked well.
  peace,
  matt,
  flagstaff, az
  Answered on 5/8/2013 by Mattski from Flagstaff, AZ
- VERIFIED BUYER
  
  A:
  Hello I have 10' hyside myself and did the same install.Just sanded the threads down so that they where even then glued as normal. Havent had a problem been on there for two years.Matt
  Answered on 5/8/2013 by raftermatty from slc
- A:
  Bruno, I'd trim them as close to the tube as practical before starting the installation.
  Answered on 5/8/2013 by Clyde from NRS
- VERIFIED BUYER
  
  A:
  Use a razor to cut the excess threads as short as you can and glue over them.. There is no reason why they would fail- that glue is powerful. Just get as much contact space for the glue to adhere as possible.
  Good luck!
  Sent from my iPhone
  Answered on 5/7/2013 by Anonymous

Displaying question 1

Do you have a question about this product?

	Login or Register My CartMy Cart Login or Register My CartMy Cart Login or Register My CartMy Cart Community \| Souls + Water \| Gear Swap 877.677.4327 \| Email Us Library Video Library Fit Lists International Dealer Locator Customer Service FREE Shipping on Orders Over $75* Free Shipping
	What's Hot Clearance Rack Yakima Sale New Products 2013 Sneak Peek Gift Guide Shop Gear Apparel Bags & Boxes Boats & Inflatables Camping & More Canoes Fishing Accessories Float Tubes Frames Fun Stuff Helmets Kayak Accessories Kayak Flotation Kayak Outfitting Kids' Gear Life Jackets Oars Paddles Pumps Repair Roof Racks Safety & Rescue Sprayskirts & Covers Straps SUP Videos & Books Outfitter Gear List	NRS Home > Repair > D-Rings & Footcups NRS Pennel Orca Fixed Batten System $22.95 This Item was added to Your Cart QTY Check Availability Item# 1455 / 37351.01 Product Rating Write a Review Q&A Ask questions, get answers Ask a Question Share Share \| Product Info Specs Reviews Q&A Allows quick and easy installation and removal of raft thwarts. Requires two per thwart. More Information Clifton Hypalon Instructions Boat-side patch 9 3/4" x 6" Thwart-side patch 6 1/2" x 6" Includes batten Use Clifton adhesive for application REVIEW SNAPSHOT® by PowerReviews NRS Pennel Orca Fixed Batten System 4.7 (based on 3 reviews) Ratings Distribution 5 Stars (2) 4 Stars (1) 3 Stars (0) 2 Stars (0) 1 Stars (0) 100% of respondents would recommend this to a friend. Pros Cons Best Uses Was this a gift?: No (3) Write a Review Reviewed by 3 customers Sort by Displaying reviews 1-3 Back to top 9/24/2012 4.0 Easily convert your old Lace-in thwarts By Mattski from Flagstaff, AZ About Me Casual/ Recreational Pros Works Well Cons Best Uses Convert Older Model Comments about NRS Pennel Orca Fixed Batten System: I have an older Achilles self bailing with lace-in thwarts which worked well but were very cumbersome and time-consuming to install. Taking the time to install these will greatly enhance your boating experience without compromising the integrity or strength of the boat or thwarts. Was this a gift?: No Bottom Line Yes, I would recommend this to a friend Was this review helpful? Yes / No - You may also flag this review 7/17/2012 5.0 Nice Retro-fit, By Epic Andy from Asheville, NC Pros Cons Best Uses Comments about NRS Pennel Orca Fixed Batten System: Able to take fixed thwarts out for oar frame, then replace thwarts for paddle raft. Added plus is using the plastic batten in its sleeve without thwarts for tie down of frame inside the raft. ( acts like a D-ring without being in the way as a paddle raft.) Easy to use. Was this a gift?: No Bottom Line Yes, I would recommend this to a friend Was this review helpful? Yes / No - You may also flag this review 5/29/2011 5.0 Works great!!! By Matty from Sandy,Ut Pros Easy to Install Cons Best Uses Comments about NRS Pennel Orca Fixed Batten System: I used theses to replace the thwarts I cut out to use my row frame. Installing them was a breeze. Was this a gift?: No Bottom Line Yes, I would recommend this to a friend Was this review helpful? Yes / No - You may also flag this review Displaying reviews 1-3 Back to top Do you have questions about this product? Ask a question get answers from real customers and in-house experts with AnswerBox. 1 Question \| 5 Answers Displaying question 1 NRS Pennel Orca Fixed Batten System Q: I have a hyside 10' raft and I cut the threads connecting the thwarts to remove them. I want to install the Pennel orca fixed batten system but there are still threads present on the thwarts and raft where I will put the new battens. Do I need to remove all these threads to get good contact or can I just glue over them? Some threads are longer than others. Asked on 5/7/2013 by Bruno Know the answer? Answer this question 5 answers VERIFIED BUYER A: You need to sand the thwart and the tube of the boat to get proper adhesion... just sand off the threads at this time and you will be good to go.. I use a sanding disc in a drill motor... Answered on 5/8/2013 by Steve from Seattle VERIFIED BUYER A: I would recommend removing all the threads, as labor-intensive as this may be, to get a good adhesion between the batten and tube. Mine worked well. peace, matt, flagstaff, az Answered on 5/8/2013 by Mattski from Flagstaff, AZ VERIFIED BUYER A: Hello I have 10' hyside myself and did the same install.Just sanded the threads down so that they where even then glued as normal. Havent had a problem been on there for two years.Matt Answered on 5/8/2013 by raftermatty from slc A: Bruno, I'd trim them as close to the tube as practical before starting the installation. Answered on 5/8/2013 by Clyde from NRS VERIFIED BUYER A: Use a razor to cut the excess threads as short as you can and glue over them.. There is no reason why they would fail- that glue is powerful. Just get as much contact space for the glue to adhere as possible. Good luck! Sent from my iPhone Answered on 5/7/2013 by Anonymous Displaying question 1 Ask a question Do you have a question about this product? Related Items Alternate Items Clifton Hypalon Adhesive Clifton Hypalon Accelerator Roller Rasp Hand Tool NRS Pennel Orca Raft and Inflatable Kayak Repair Kit NRS Pennel Orca Adjustable Batten System NRS Thwart Batten with Tie Related Search Batten Attachment Thwart System Batten Thwart
	Sales, Offers, Trip Tales... Don’t miss out! Sign-up for e-News Customer Service Email Us 877.677.4327 Contact Departments Shipping Info Returns: Hassle-Free Rock Solid Guarantee Warranty Registration Gift Cards Boater's Bucks FAQs Catalogs e-Newsletter Company Info About Us Press/Media NRS Wholesale Privacy & Security Website Feedback Sitemap Affiliates Community Photo/Story Submission Share with Us Gear Swap Team NRS Souls + Water Duct Tape Diaries River Links Twitter Twitter Facebook Facebook Youtube NRS - 2009 S. Main St., Moscow, ID 83843 - 877.677.4327 - Copyright 2013 - All Rights Reserved