Eddy Out Aluminum Dry Box 36L x 16H x 16D
- Constructed of heavy-gauge marine-grade aluminum for a lifetime of dependable dry storage.
- The carry handles are padded for comfort when moving a loaded box.
- The continuous "piano hinge" style hinge is extremely rugged.
- A thick rubber gasket completes the watertight closure.
- A wire cable stop supports the lid when open.
- Dry boxes also make a great seat for rowing from or for your passengers in a raft or cataraft.
- Two tension-adjustable front latches keeps the box secured during the roughest ride.
- Dimensions: 36"L x 16"H (top to bottom) x 16"W (front to back): 5.3 cu. ft, 24.5 lbs.
- Material: .080 Inch - 5052 Marine Aluminum
- Dimensions: 36"L x 16"H (top to bottom) x 16"W (front to back): 5.3 cu. ft, 24.5 lbs.
- Rubber Gasket
- 2 Carry Handles (Bolted and Spring Loaded)
- 2 Front Latches, Tension Adjustable
REVIEW SNAPSHOT®
by PowerReviews(based on 3 reviews)
Ratings Distribution
100%
of respondents would recommend this to a friend.
Pros
Cons
Best Uses
- Was this a gift?:
- No (3)
Reviewed by 3 customers
Sort by
Displaying reviews 1-3
Pros
- Rugged
Cons
Best Uses
- Kayaking
Comments about Eddy Out Aluminum Dry Box 36L x 16H x 16D:
I bought 2 for my 2 lynx 2s so I can store them safe from rodents.
- Was this a gift?:
- No
Pros
- Cleans Easily
- Functional
- Quick Drying
- Rugged
Cons
- Heavy
Best Uses
- Boating
Comments about Eddy Out Aluminum Dry Box 36L x 16H x 16D:
A perfect addition to our raft. We did an overnighter on the Colorado and it had plenty of room to hold our essential gear that had to stay dry. Also makes a great place for our dog to lie down as we float the river.
- Was this a gift?:
- No
Pros
Cons
Best Uses
Comments about Eddy Out Aluminum Dry Box 36L x 16H x 16D:
These are the best dry boxes ever. Bought two.
- Was this a gift?:
- No
Displaying reviews 1-3
Do you have questions about this product?
get answers from real customers and in-house experts with AnswerBox.
- Eddy Out Aluminum Dry Box 36L x 16H x 16D
Q:
Do you sell the lid seal separately for dry boxes? If not, do you have recommendation on where I can find a product comparable to the original? The seal on box was damaged, I replaced it with a foam type seal and it continues to leak.
Thanks,
JoshAsked on 4/18/2013 by Josh from Eagle, CO1 answer
A:
Josh, the replacement gasket is Item # 3070.2. It's the same material as the original gasket and is self adhesive. They are in stock.Answered on 4/18/2013 by Clyde from NRS
- Eddy Out Aluminum Dry Box 36L x 16H x 16D
Q:
Will the 36" inch box fit in a NRS E-130 raft? I know it depends on the frame but the specs for the boat is 37 inches wide and I just wonder if 1 inch between the sides of the tubes is enough.Asked on 9/19/2012 by jkinsman from Bellingham, WA4 answers
VERIFIED BUYER
A:
I am not familiar with the specs of the E-130 raft, but you need to account
for the diameter of aluminum frame if you are going to have one. My box
fit in my raft, but the cooler did not and I turned both sideways and added
an extra tube to the frame in the back splitting the rear compartment area
behind the seat in half (tube ran bow to stern direction) to drop them in
side by side.Answered on 9/20/2012 by AnonymousA:
This box should be fine in an E-130. If the box is centered it won't rub the tubes. If in the course of use you do get some wear it's a simple thing to glue in a wear patch.Answered on 9/20/2012 by Clyde from NRSVERIFIED BUYER
A:
I have a NRS. E 13.6. The inside specs are almost the same. This 36inch box fits great in my self made frame, and the boat. Your boat should have 38 inches inside.
Ron BlakeAnswered on 9/20/2012 by AnonymousVERIFIED BUYER
A:
I have a Sotar Strike that I put the 36" box into. The Strike is only 34"
wide. It's tight but it most definitely fits. I have welded mounting
brackets onto the box so it rests on my frame and not on the floor of the
raft. There are about a dozen of us here in Missoula Montana that have
this set up and as of yet no one has had any issues. Hope this helpsAnswered on 10/9/2012 by Anonymous
