Scotty Glue-On Mount Pad 341
$11.95
The Scotty® Fly Rod Combo Mount lets you securely mount your fly rod to your kayak, inflatable kayak, canoe, fishing SUP or other boat. A must-have for kayak fly fishing.
-
The Scotty® Glue-On Mount Pad lets you securely attach any Scotty rod holder or mounting system to your inflatable Kayak, fishing SUP, pontoon fishing boat or other inflatable craft.
- Simply affix the Glue-On Mount Pad to your boat with the proper adhesive, then bolt on your Scotty rod holder or accessory mount.
- Works great with inflatable kayaks, fishing SUP boards and pontoon boats such as the NRS GigBob.
- Manufactured from flexible PVC and can be bonded to nearly any inflatable boat material, including PVC, Hypalon, Pennel Orca and polyurethane.
- Attach to PVC, Hypalon, Pennel Orca® or polyurethane boats using StaBond™ Adhesive, NRS item #1903.
- Note: Hardware is only for attaching an accessory to the mount. Please do not use hardware on the Mount pads alone.
- Material: PVC
- Size: 7" x 5"
REVIEW SNAPSHOT®
by PowerReviewsScotty Glue-On Mount Pad 341
(based on 1 review)
Ratings Distribution
Reviewed by 1 customer
Displaying review 1
Pros
- Great for inflatables
Cons
Best Uses
- Pontoon boats
- Rafts
Comments about Scotty Glue-On Mount Pad 341:
This is a great product for adding rod holders to any inflatable.
- Was this a gift?:
- No
Displaying review 1
Do you have questions about this product?
get answers from real customers and in-house experts with AnswerBox.
3 Questions | 11 Answers
Displaying questions 1-3
- Scotty Glue-On Mount Pad 341
Q:
I have a Sea Eagle 330 that I think this mount will work on. The question is, will the Scotty Bait Caster/Spinning Rod Holder 280
fit into this?? If so, it looks like you have to bolt the base of the rod holder to the plate before epoxying it to your inflatable. I can't see where the rod holder would snap into place or such.
Is this correct??Asked on 4/6/2013 by Doug from Spokane< WA7 answers
VERIFIED BUYER
A:
Yes, this works with the Scotty 280 rodholder.
Tight lines,
ChrisAnswered on 4/8/2013 by AnonymousVERIFIED BUYER
A:
Yes.
I would recommend buying the scotty mount made for pontoon boat or float
tube. It has 2 straps on it that you can simply cinch down with the mount
already attached. That way u can take it on and off and reposition it at
will without having to glue anything on permanently...Answered on 4/8/2013 by Anonymous
A:
Doug, you would first glue this pad to your boat, using Stabond Adhesive. Then, you can bolt any of the Scotty rod holders and accessories to the Mount Pad.Answered on 4/6/2013 by Clyde from NRSVERIFIED BUYER
A:
I've got the fly rod holder mounted to this add-on pad on my Scadden raft. Works GREAT!Answered on 4/6/2013 by AnonymousVERIFIED BUYER
A:
Doug,
There are four square nuts that fit into recesses under the mount. Then
the included screws go through the rod holder base and through the mount
to the square nuts. Once the whole thing is glued down, the nuts are locked
in place and no longer accessible. You would want to be careful not to
strip the threads in the square nuts, or use screws that are too long.
Hope this is helpful.
EdAnswered on 4/7/2013 by AnonymousVERIFIED BUYER
A:
Good news: the rod holder will fit on this plate. Before gluing it, just snap the four square bolts in place, on the back of the plate.
If this is your first time gluing staff on your inflatable, I can give you some advise how to do it right (don't use epoxy).
My email is ****@***.***
Good luck!Answered on 4/7/2013 by AnonymousVERIFIED BUYER
A:
Hi - I just bought this to mount a Scotty anchor holder on to my inflatable pontoon. I already had the anchor holder but it had a strap-on mount. You are correct - the nuts snap into the underside of the mount prior to gluing it into place, then you screw the base plate of your holder onto the mount.. I'm guessing that the Scotty bases are the same for all of their devices, and your rod holder just pops into the base the same way that my anchor does. I bought the Stabond two part adhesive, and it worked great, but use it outside as it has some nasty solvent smell. Also mix it in something somewhat heavy as it melted through the plastic cup I mixed it in. Good luck!
Steve Kreiser
Sr. Industrial Engineer
www.restek.com<http://www.restek.com/>
Restek Corporation 110 Benner Circle, Bellefonte, PA 16823
Phone***.**** * Fax***.****e-mail: ****@***.***<mailto:****@***.***>
P Please consider the environment before printing this e-mailAnswered on 4/8/2013 by Anonymous
- Scotty Glue-On Mount Pad 341
Q:
I am looking to install this mount on a Hypalon boat. What glue would be the best to use with having the two different materials? Thank you for your help.Asked on 3/1/2013 by Adamb from Bothell, WA2 answers
- Scotty Glue-On Mount Pad 341
Q:
can this product be used in combination with a fish finder mounting bracket?Asked on 9/5/2012 by Tic from Newfoundland, Canada2 answers
Displaying questions 1-3
Related Items
Related Search
